Grundfos CMB 5-46 A-C-A-O-P-B (98158281)
Produkt ID: 98158281
Anfrage Preis und Verfügbarkeit
Grundfos CMB 5-46 A-C-A-O-P-B (98158281)
The Grundfos CM PT Booster is an automatic booster system for water supply in domestic and agricultural applications as well as other installations where minor leakages are expected to occur. The booster system consists of a Grundfos CM pump, a pressure tank and a pressure switch assembled into one unit. The system is supplied ready for use with preset start pressure and corresponding tank precharge pressure. The pressure band is approximately 1 bar. The system is simple to install. When the system has been connected to the pipes, it is all a matter of inserting the plug into a power supply socket, and the system is operational.
The Grundfos CM PT Booster is mainly used for agricultural and light-commercial water supply and similar water installations where minor leakages can be expected.
| NB: | |
| Suction lift: | maximum 1 m, including inlet pipe pressure loss at a liquid temperature of 20 °C (not self-priming). |
| Art der Steuerung: | |
| Type of connector: | Type O (TIS 166-2549) |
| Fördermedium: | |
| Fördermedium: | Wasser |
| Medientemperaturbereich: | 0 .. 60 °C |
| Medientemperatur während des Betriebs: | 20 °C |
| Dichte: | 998.2 kg/m³ |
| Technische Daten: | |
| Pumpendrehzahl, auf der die Pumpendaten beruhen: | 2900 1/min |
| Nennförderstrom: | 4.6 m³/h |
| Nennförderhöhe: | 38.6 m |
| Gleitringdichtung: | AVBE |
| GLRD Code: | AVBE |
| Zulassungen: | CN ROHS EXE |
| Rückschlagventil: | Ja |
| Einschaltdruck: | 1-5 bar |
| Werkstoffe: | |
| Pumpengehäuse: | Grauguss |
| Pumpenmantel: | EN 1561 EN-GJL-200 |
| Pumpengehäuse: | ASTM A48-30B |
| Laufradwerkstoff: | Edelstahl |
| Laufrad: | EN 1.4301 |
| AISI 304 | |
| Installation: | |
| Maximale Umgebungstemperatur: | 55 °C |
| Max. Betriebsdruck: | 10 bar |
| Pipe connection standard: | ISO 228-1 |
| Anschlusstyp Eintritt: | Rp |
| Anschlusstyp Austritt: | R |
| Größe des Sauganschlusses: | 1 1/4 |
| Größe des Druckanschlusses: | 1 |
| Nenndruckstufe: | PN 10 |
| Elektrische Daten: | |
| Rated power - P2: | 0.9 kW |
| Netzfrequenz: | 50 Hz |
| Bemessungsspannung: | 1 x 220-240 V |
| Maximum current consumption: | 5.4-5.0 A |
| Nenn-Drehzahl: | 2750-2790 1/min |
| Schutzart (gemäß IEC 34-5): | IP55 |
| Isolationsklasse (IEC 85): | F |
| Motorschutz: | TP 211 |
| Kabellänge: | 1.5 m |
| Netzstecker: | Thailändische Steckerausführung |
| Behälter: | |
| Behältervolumen: | 24 l |
| Sonstiges: | |
| Nettogewicht: | 22 kg |
| Bruttogewicht: | 25 kg |
| Zulassungen: | WEEE |
Anwendungen
- Druckerhöhung für Gewerbeimmobilien — Effiziente und zuverlässige Druckerhöhungsanlagen für die Wasserversorgung mit konstanten Druck und Kommunikationsmöglichkeiten mit anderen Anlagenkomponenten
- Druckerhöhung in Privathaushalten — Geringer oder schwankender Wasserdruck ist nichts Außergewöhnliches bei Ein- und Zweifamilienhäusern. Dies führt zu hohen Komforteinbußen für die Hausbewohner, wenn z. B. das Wasser beim Duschen nur noch spärlich aus dem Brausekopf tröpfelt.
category
- DruckerhöhungsanlagenGrundfos liefert Druckerhöhungsanlagen für Hotels, Hochhäuser, Bewässerungssysteme und andere Anwendungen in der Wasserversorgung, die einen konstanten Druck erfordern. Erfahren Sie hier mehr über die große Auswahl an Grundfos Druckerhöhungsanlagen.