Lenntech <!-- PLUGIN:LANGUAGE:water_treatment_and_purification --> Lenntech <!-- PLUGIN:LANGUAGE:water_treatment_and_purification -->

GE, Electrodeionization EDI-modules

In semiconductor fabrication, the use of reverse osmosis (RO) is considered essential to achieve the
purity levels necessary for wafer production.

In power plants, increased recognition of the effect of ultrapure water quality on system component life has resulted in demand for membrane systems which can render an even higher purity of water than mixed-bed deionization systems alone can achieve (e.g. lower TOC, particles, etc.). Such high levels of demineralization can be obtained using electrodeionization (EDI). EDI combines ionexchange resins, ion-exchange membranes, and a direct (DC) electric field. Basically, EDI is an electrodialysis (ED) process modified by the addition ofion-exchange resin. When EDI is used for the production of high purity water, the ion-exchange resin beads enhance mass transfer, facilitate water splitting, and reduce stack resistance.

The ionexchange resin exchanges ions with the incoming feed stream. The DC electrical field splits water into hydrogen and hydroxyl ions, which, in turn, continuously regenerate the ion-exchange resins. The exchanged ions are transferred through the membranes to the brine stream and flushed from the system.1,2 Compared to conventional ion exchange, EDI has the advantage of being a continuous process with constant stable product quality, which is able to produce ultra high purity water without the need for acid or caustic regeneration.

Part number

Model Name

Replaced by


3063891 GE-ECell-3XHH
GE-ECell-3X
GE-E-Cell
3019185 GE-E-Cell-MK-2E MK-3
3019189 GE-E-Cell-MK-2ST MK-3
3019226 GE-E-Cell-MK-2-MiniHT MK-3MiniHT
GE-E-Cell-MK-3-1-12
GE-E-Cell-MK-3-15-27
GE-ECell-MK-3
GE-ECel-lMK-3MiniHT
3018627 GE-ECel-lMK-3Mini MK-3MiniHT
GE-ECell-MK3PharmHT
3020056 GE-ECell-MK3Pharm
GE-E-Cell-PharmHT
GE-E-FSpwE-Cell-MK-3-1to12
GE-E-FSpwE-Cell-MK-3-15to27
GE-E-FSroPRO-E-Cell
GE-Electromat
GE-FSelE-Cell-3XHHStack
GE-FSelE-Cell-3XStack
GE-FSelE-Cell-3XStandard-1to12
3019185 GE-MK-2E MK-3
3019231 GE-MK-2Mini
3019226 GE-MK-2MiniHT MK-3MiniHT
3019225 GE-MK-2PharmHT MK-3PharnHT
3019230 GE-MK-2Pharm MK-3PharnHT
GE-WasteWizard
NOTE:

MK-2 line and MK-3 line stacks cannot operate on the same system together due to operational differences.
All MK-2 line stacks on a system must be replaced with their corresponding MK-3 stacks.
At sites with multiple E-Cell systems , the switch from MK-2 line to MK-3 line stacks can be done one system at a time , consolidating MK-2 line stacks onto remaining systems for a gradual changeover.

Overview GE EDI Electrodeionization modules

Für weitere Informationen oder ein Angebot, kontaktieren Sie Lenntech: Antworten Form oder per Telefon +31 152 755 705

Über Lenntech

Lenntech BV
Rotterdamseweg 402 M
2629 HH Delft

tel: +31 152 755 705
fax: +31 152 616 289
e-mail: info@lenntech.com


Copyright © 1998-2016 Lenntech B.V. All rights reserved